Installation Guide

Harrison Set-N-Forget Bushfire Sprinkler. Simple Installation Guide Step 1. Hook to Gutter.   Harrison Set-N-Forget Bushfire Sprinkler. Simple Installation Guide Step 2. Connect to Garden Hose.  Harrison Set-N-Forget Bushfire Sprinkler. Simple Installation Guide Step 3. Turn Tap On.

STEP 1 - HOOK TO GUTTER

Simply hook the Harrison Set-N-Forget Sprinkler bracket onto your gutter. The stainless steel pipe is 1.6m high and only weighs 1.2kg for easy installation.

The bracket is designed to fit all standard gutter types. 

Tip: Position your sprinklers on the side of the house facing the bushfire front.

 

STEP 2 - CONNECT TO GARDEN HOSE

Connect to your garden hose. We recommend using a 18mm-20mm garden hose for the best coverage. (Please note: garden hose not included with product)

Tip: Upgrade your standard garden hose (12mm) to the larger 18mm size for increased water flow and coverage.

 

STEP 3 - TURN TAP ON

Turn the tap on and double check that the sprinkler is correctly connected. You can now make your exit if it is safe to leave your house. Ember attacks can occur before, during and after a bushfire event so we recommend turning your sprinkler on early and keep it going until the bushfire is 100% under control.

Tip: Ensure that your tap is fully turned on to ensure the best coverage and only use 1 sprinkler per tap. We recommend installing additional taps around your house in preparation for a bushfire event. 

We strongly recommend that you practice setting up the Harrison Set-N-Forget Bushfire Sprinkler in preparation of a bushfire. This should include identifying where your taps are and the best locations for the sprinklers. You should time how long it takes you to set up and add this information to your Bushfire Survival Plan. This way you will be confident and ready to go.